Mounting LED Strips

How to Mount LED Strips

Method 1: Aluminum Channel (Best Results)

Aluminum channels provide:

• Heat dissipation (LEDs last longer)
• Diffused light looks professional
• Clean, finished appearance
• UV protection for outdoor use

Installation:

1. Measure and cut channel to length
2. Screw or adhesive-mount channel to surface
3. Peel and stick strip inside channel
4. Snap on diffuser cover
5. Connect power and test

Method 2: 3M VHB Tape (Quick)

• Use for temporary or indoor installations
• Clean surface with isopropyl alcohol first
• Press firmly for 30 seconds
• Works best on smooth, clean surfaces

Method 3: Outdoor Permanent (Roofline)

For permanent holiday lights:

1. J-channel or L-track mounted under roofline/eave
2. Insert pixel strip inside channel
3. Use silicone caulk at ends/joins for waterproofing
4. Leave 5mm expansion gap every 5m for temperature changes

Corner Techniques

• Miter cut — cut channel at 45° for 90° corners
• Flexible connector — use corner connectors between channel segments
• Minimal bend radius — strip can bend to ~30mm minimum (check datasheet)